British Manufacturing Specialists
*Christmas Shutdown Dates* - 12pm 20th December 2024 to 8.30am 2nd January 2025
Wishing you a Merry Christmas and a Happy New Year!
INSTALLATION EQUIPMENT
Welcome to the world of efficient and versatile machinery, where innovation meets precision. Our cutting-edge solutions encompass a dynamic range of options, from handheld machines to robust excavator-mounted systems. At the heart of our operation lies the commitment to excellence, as each piece of equipment is meticulously manufactured on-site by our parent company Autoguide Equipment to ensure unrivaled quality. Whether you're navigating challenging terrains or seeking to anchor structures with precision, our machinery specialises in the seamless installation of screw piles, setting the foundation for your projects with utmost reliability and ingenuity.
​
The following torqueheads are used to install ABC Anchors screw piles, there are 3 sizes or torqueheads depending on the size of the piles you are installing.
500X/XG Torquehead (60R Screw Piles)
Choice of mounting brackets allows the 500X to be fitted to excavators from 1.5 to 6 tonnes, and allows anchor installation at a wide range of angles.
1600X Torquehead (76R Screw Piles)
Choice of mounting brackets allows the 1600X to be fitted to excavators from 4 to 7 tonnes, and allows anchor installation at a wide range of angles.
2500X/XG Torquehead (89R Screw Piles)
Choice of mounting brackets allows the 2500X to be fitted to excavators from 4 to 10 tonnes, and allows anchor installation at a wide range of angles.
These unique through drive heads are designed around operator comfort and safety as the piles are driven from no more than 1m from the ground.
This also ensures that the torque arm is at a safe angle. Once the pile has started in the ground it can then progress with small adjustments to ensure installation angle is achieved.
The 400H/700H was designed for installing screw piles in areas of very limited access, including use for inside buildings.
A standard 30l/min power-pack is used to power the driver. The torque gauge is calibrated to offer an installation torque in kNm.